INVESTIGATION OF A WORKING ELEMENT WITH A FLANGE COMPONENT MOUNTED ON A SHAFT

Aygun Guliyeva

doi:10.36074/grail-of-science.26.12.2025.064

INVESTIGATION OF A WORKING ELEMENT WITH A FLANGE COMPONENT MOUNTED ON A SHAFT

Authors

Aygun Guliyeva Azerbaijan University of Architecture and Construction, Republic of Azerbaijan

DOI:

https://doi.org/10.36074/grail-of-science.26.12.2025.064

Keywords:

Flange element, moment of inertia, torque, working body, mechanical load, axial force

Summary

This study investigates the dynamic of a working body with a flange element mounted on a shaft. Due to the varying cutting and resistance forces acting on the working bodies used in cast-in-place piles, depending on the geological structure of the soil, the moment of inertia and torque of the flange elements are of significant importance. The article presents a procedure for calculating the total moment of inertia, considering the mass of the flange, the moment of inertia about the central axis, and the influence of holes. Additionally, the analysis of axial force, bending moment, shear force, and torque acting on the flange element is provided. The results are of practical significance for the design of mechanical systems and ensuring the reliable operation of working bodies.

Downloads

PDF

Downloads

Download data is not yet available.

License

References

Bansal, R. K. (2010). Strength of materials. New Delhi, India: Laxmi Publications.

Beer, F. P., Johnston, E. R., DeWolf, J. T., & Mazurek, D. F. (2015). Mechanics of materials (7th ed.). New York, NY: McGraw-Hill Education.

Budynas, R. G., & Nisbett, J. K. (2020). Shigley’s mechanical engineering design (11th ed.). New York, NY: McGraw-Hill Education.

Fürst, H., & Sprysl, J. (2000). Determination of polar moment of inertia. Journal of Mechanical Design, 122(4), 725–729. https://doi.org/10.1115/1.1285900 DOI: https://doi.org/10.1115/1.1285900

Hibbeler, R. C. (2017). Mechanics of materials (10th ed.). London, UK: Pearson Education.

Meriam, J. L., & Kraige, L. G. (2012). Engineering mechanics: Dynamics (8th ed.). Hoboken, NJ: Wiley.

Peng, W., & Yan, J. (2022). Torsional vibration characteristics of shafts with multiple inertias. International Journal of Mechanical Sciences, 224, 106118. https://doi.org/10.1016/j.ijmecsci.2022.106118 DOI: https://doi.org/10.1038/s41598-022-11211-x

Zhang, L., & Li, H. (2018). A precision method for rotational inertia measurement. Mechanical Systems and Signal Processing, 98, 1–10. https://doi.org/10.1016/j.ymssp.2017.04.045 DOI: https://doi.org/10.1016/j.ymssp.2017.04.045